废弃药渣中残留泰乐菌素降解菌的筛选

发酵法生产抗生素过程中会产生大量废弃药渣.由于残留抗生素的存在,极大地限制了药渣的资源化利用.以泰乐菌素药渣为研究对象,采用微生物法探讨降解药渣中残留泰乐菌素的方法.结果表明:从长期堆放泰乐菌素药渣附近土壤中筛选到可降解药渣残留泰乐菌素的菌株,将该菌株以10%的接种量,在30～35 ℃,pH为7的条件下,发酵处理泰乐菌素药渣120 h后,微生物法未检出残留泰乐菌素的存在.提示利用微生物法可以消除药渣中残留泰乐菌素,从而为泰乐菌素药渣有效处理提供可鉴方法.      

制药废水生化出水的强化混凝—高级氧化深度处理组合工艺比较

采用强化混凝和高级氧化法对制药废水生化出水进行深度处理,比较了不同混凝剂、不同氧化方法（包括Na₂S₂O₈氧化、电化学氧化、Fenton/类Fenton氧化）的处理效果。实验结果表明：经聚合硫酸铁与聚丙烯酰胺强化混凝处理后,废水的COD去除率达18.5%;强化混凝与不同氧化方法联用均可使废水脱色至无色,COD去除率达70.1%~92.4%。强化混凝—电化学氧化组合工艺的出水COD为27.1 mg/L,达到GB 8978—1996《污水综合排放标准》一级标准限值要求,且成本较低,适于实际应用。     

Risk Factors to Musculoskeletal Disorders and Anthropometric Measurements of Filipino Manufacturing Workers

This study looked into the risk factors to musculoskeletal disorders and established anthropometric measurements of Filipino workers in 29 manufacturing industries. Anthropometric measurements of 1,805 workers were taken, and 495 workers were surveyed. Limitation of motion was found in 0.8% of the respondents, affectation in activities of daily living was seen in 1.6% and 3.2% felt discomfort in the head and neck. Upper trunk and low back pain was experienced by 23.8%. Odds ratio results (p = .05) showed that it is 29 times likely for workers to develop low back pain when they stand for 2-8 hrs a day than when they sit all the time. Anthropometry can be used for the design ofworkstations and work furniture.     

Applying 3DCE to environmentally responsible manufacturing practices

A review of recent literature in the fields of operations, supply chain, and management indicates there is on-going interest in improving new product development (NPD) performance. Three-dimensional concurrent engineering (3DCE), the simultaneous design of product, process and supply chain have been proposed as a way to improve traditional NPD outcomes, such as reduced time to market, lower costs, and improved customer acceptance. There appears to be a lesser concern associated with the environmental impacts of new products. Environmentally responsible manufacturing (ERM) on new product development focuses on reduced emissions, hazardous materials elimination, and lower product weight without sacrificing functionality. This paper explores the following issue: will employing 3DCE to integrate NPD and ERM yield better benefits than the separate and uncoordinated application of environmental goals and NPD initiatives?     

Applying CES to assembly and comparing carbon footprints

A Carbon Emission Signature (CES) and a Carbon Emission Label have been proposed for manufactured products in previous CIRP (Collège International pour la Recherche en Productique) annals. This paper considers two things: (1) an example of a CES calculation for assembly with CO₂ emissions and (2) the need for a transparent method of calculation. In comparing carbon footprint calculations for 17 websites, the results are found to vary more than threefold depending upon the site used and even more between different methods illustrating the need for standardisation in emission calculations for carbon accounting.     

Decision support for sustainable manufacturing using decision guidance query language

Sustainability has become a very significant research topic as it impacts many different manufacturing industries. Therefore, the technologies for monitoring, analysing, evaluating and optimising the sustainability performance of manufacturing processes and systems are very critical for decision makers on the shop floor. This paper introduces a decision guidance management system that provides actionable recommendations through quantitative analysis of the sustainability measures of manufacturing processes and systems based on life cycle assessment. The system determines decision preferences through dynamically collected data and decision makers' responses, taking into account the prevailing constraints. Optimal decisions can be derived using mathematical and constraint programming. By using decision guidance query language, this methodology allows users to make optimal decisions without an extensive mathematical or operations research background. Knowledge of relational databases is sufficient for a user to formulate the optimisation problem and obtain optimal solutions. The methodology is demonstrated with a machining operation case study, in which a list of sustainability metrics are identified and sustainability modelling methods are proposed. Important sustainable machining performance measures are optimised, resulting in actionable recommendations.     

Sustainable outsourcing: a practice survey and research opportunities

This paper addresses the issue of the sustainability imperative and its influence on outsourcing practice. The research initially finds that there is currently little or no work that explores sustainable or green outsourcing, other than in an information technology context. This lack of research on sustainable outsourcing practice in the industrial organisation sector led to the development of this research study. This exploratory study used a qualitative survey tool to investigate current industrial practice. Manufacturing managers in 57 organisations formed the survey sample. The data were analysed by comparison and clustering of responses of survey participants. This study contributes five key findings that demonstrate current industrial practice which includes: 32% of respondents state that sustainability is not a factor in their outsourcing decision making and 65% of small- and medium-sized enterprises had never heard of the ‘triple bottom line’ concept. Future research needs are identified and proposed highlighting that urgent development of research is required in outsourcing performance measurement and also in considering sustainability as a new manufacturing competitive priority.     

Current Status of Manufacturing Hazardous Waste in Shanghai

Abstract

It is difficult to manage the manufacturing hazardous waste (MHW) which is generated from a huge amount of complicated sources and causes very serious pollution. Therefore more and more attention has been paid to MHW pollution. Shanghai, as an industrial and economic center and an international metropolis in China, has a vast industrial system spanning a multitude of sectors, which generates MHW not only in a huge magnitude but also in a large variety of types from complicated sources, resulting in severe pollution. In 2003, the production of MHW in Shanghai is about 3.96 × 10⁵ ton, involving 33 indices. Most of MHW in Shanghai is treated and disposed of, but a significant portion is not handled properly and effectively. This paper carries out in-field investigation on the current status of MHW production and treatment in Shanghai, and puts forward scientific proposals that Shanghai should facilitate cleaner production and minimize hazardous waste; strictly enforce hazardous waste registration system, strengthen monitoring the certified enterprises; strengthen intent disposal center construction and realize hazardous waste reclamation; accelerate establishing the technical criteria and the management policy, promote the research and development on the treatment and disposal technology, and strengthen information management, thus realizing integrated management on MHW pollution.     

Optimization of the recovery of plastics for recycling by density media separation cyclones

Material recovery processes are presented as the optimum option for recycling plastic wastes as a means of recovering hydrocarbon resources. There exist a large variety of automated material recovery processes for recycling of such wastes but each with significant limitations. Of these, the separation based on differences in densities is advocated as the optimum process either for producing recycled products or preparing wastes for subsequent recovery processing.Density separation processes based on cyclone type density media separation (DMS) is presented as an important, potential method for increasing plastics recycling process capacities. It is demonstrated to have the capacity to separate a significantly larger range of particle sizes than those presently processed industrially. The mathematical relationship for the prediction of quality of typical LARCODEMS type density media separations by particle size and density as expressed by the Ecart Probable is presented.A proposed device configuration is presented for density media separation to optimize the recovery and purity of both density fractions produced. It is also suggested that to be economically viable, a large scale of operation is required for industrial plastics recycling operations recovering and producing a number of different plastics with a purity to be used as a substitute for virgin material.     

内电解-混凝组合技术对合成制药废水的预处理

采用多级内电解反应器与混凝沉淀组合技术预处理典型合成制药废水.研究结果表明,组合技术对制药废水的COD去除率高于单一混凝技术和单一内电解技术;以PAM作为混凝剂的处理效果优于Ca（OH）2,在PAM投加浓度为10 m.gL-1,pH值为8的条件下,内电解与混凝沉淀组合技术对制药废水COD的去除率可达到30%.同时,组合...